Fence Installation in Fall Creek
Fall Creek is a small village in Eau Claire County, southeast of the city of Eau Claire, with a 2020 census population of 1,422. It grew up as a rail-line village surrounded by farmland, and that history still shapes the place: a compact, walkable core of older homes on small in-town lots sits close to the tracks and the creek the village is named for, while the surrounding area outside the village limits is largely agricultural. Because Fall Creek is so much smaller than the rest of the towns in this service area, fence projects here tend to be more evenly split between simple in-town lot-line jobs and larger rural-residential or hobby-farm boundary fencing just outside the village itself.
On the smaller in-town lots, fencing is usually about the same two things that drive demand everywhere: keeping a dog contained, and marking a clear line between two houses that don't have much space between them. On the rural-residential edges of the community, fencing projects tend to be larger in scope — a run around a bigger lot, a paddock or garden enclosure, or a boundary fence between two larger parcels — which is a different kind of project than a typical in-town backyard fence, even though both fall under the same village permit process.
Fall Creek's small size means it doesn't have the neighborhood-by-neighborhood variety of a larger city — most of the village is within a few blocks of the same handful of streets near the old rail line — but that also makes it one of the more straightforward towns in the service area to plan a fence project in, since lot lines tend to be clearly platted and long-established rather than a patchwork of older and newer development. The trade-off is that any project involving a larger parcel just outside the platted village grid, where zoning may shift from village residential to county agricultural land, is worth confirming with the village before assuming the standard in-town figures below apply.
Permits and Height Rules in Fall Creek
A fence permit is required in Fall Creek — the village's own building and zoning page lists fences alongside swimming pools, decks, and satellite dishes as projects that need a permit before work starts, and requires a site plan showing the fence's location relative to lot lines and other structures. The village's fence permit application sets out a $25 fee and specific height limits: a front yard or a yard adjacent to a street is limited to 4 feet, dropping to 2 feet 6 inches within a traffic-visibility triangle at corners and driveways. Side and rear yards are limited to 6 feet, and a side- or rear-yard fence can't extend toward an adjacent street any further than the principal building's own setback line.
The permit application also specifies that the finished side of the fence has to face the adjacent property, with fence posts placed on the interior side, and reminds applicants that it's the property owner's responsibility to contact Diggers Hotline before digging post holes, even on a small residential job. This is a specific, sourced figure taken directly from the village's own fence permit form rather than the general "confirm with your municipality" framing used where no verified figure exists: Village of Fall Creek Fence Permit application. As with any small-village permit process, it's worth confirming with the Village of Fall Creek that no more recent update has changed these figures before finalizing a fence plan, particularly for a fence outside the village's platted residential lots.
Fall Creek's height limits are close to Menomonie's front-yard figure and noticeably stricter than Eau Claire's or Chippewa Falls's side- and rear-yard maximums, which is worth knowing if a homeowner is comparing notes with a friend or relative in a larger Chippewa Valley town — a fence height that's allowed a few miles away in Eau Claire isn't automatically allowed in Fall Creek. Because the village is small enough that the building inspector's office reviews every fence application directly, a project here also tends to move through the permit process on a more personal, case-by-case basis than in a larger city with a bigger planning department. That same small scale means there's little precedent for unusual fence layouts in Fall Creek compared with a larger city that has already seen most variations — which is one more reason to have a contractor familiar with the village's process handle the application rather than guessing at what the inspector will expect.
Requesting a Quote
Submitting the quote form connects you with a local fence contractor who can confirm the current permit and height requirements for your lot — whether it's a small in-town yard or a larger rural-residential parcel — and quote the project. Call (914) 530-6133 to reach someone directly, or use the quote form to describe your project and get started.